how much concrete for fence posts

With any fencing project, how much concrete you’ll need is dependent on three key factors. Firstly, you’ll need to measure the size of the ground indentation for the post. Secondly, it’s important to take into account the overall future height of the fence. And finally, factor in the amount of weight the fence will bear.

To fill an 8-inch x 24-inch depression in the ground with concrete, between 3 and 4 bags of a 60-pound concrete mix are necessary. For an 80-pound bag mix, you should prepare to use at least 3 and a half bags.

To fill the 10 inch wide by 30 inch deep hole with concrete, start by multiplying the width by the depth. In this case, that would be 10 inches multiplied by 30 inches, equaling 300. Divide that number by 27 to get the amount of cubic yards of concrete required – 11 yards.

The elevation of the fence is an integral factor in establishing how much concrete is required; a barrier of greater height requires greater amounts of concrete than a fence of compressed stature.

A sturdier fence imposes a greater demand on concrete, with weight acting as the deciding factor. A more massive fence will thus need a proportionally larger amount of concrete.

For every single foot of fence, you will typically require half a cubic yard of concrete. Therefore, when constructing a 10-foot spanning fence, you may calculate that you will require approximately five cubic yards of concrete.

Although these measurements may be approximations, it’s advisable to play it safe. Having greater quantities of concrete available is preferable to coming up short; being well-stocked is always the better bet.

Related Product